Power Supply AC GPIB - Three-phase                                                       Go to Ferner
Spänningsaggregat - AC GPIB 3-fas


Suppliers/ Leverantörer:

• ET Testsystem
• Kikusui

ET Testsystem

Electronic AC Source EAQ-M

For the complete line simulation of all technical networks from DC - 2000 Hz

Technique pure
The highly precise electronic AC source meets all your demands. The simulation of all technical lines as well as the measurement of the line characteristics is its strength. The high efficiency of the electronic AC source EAQ-M lies in the convincing technical data and the easy handling. Besides the CV- and CC-modes, there is power up to 6000 VA, voltages up to 1000 V AC, currents up to 120 A and frequencies up to 2000 Hz available.

On one Hand Simulation on the other Analysis

• CV- and CC-Mode !
• AC Voltage 0..300 Vrms (500V)
• DC Voltage 0..425 Vdc (700V)
• Frequency DC, 1 - 500 Hz (2000 Hz)
• Phase-triggered-switch on-and off
• External Oscillator inputo RS 232- Interface, IEEE 488 (option)
• Measurement Vrms V, Crms A, Cpeak A, Power W, Frequency Hz
  

Motor Controlled AC Source EAQ-MT

For line simulation of 1- and 3- phase networks

The Cost Reduced Solution at High Power

• CV Mode
• AC Voltage 0...270 Vrms (500 V)
• Performances up to 50000 VA !
• Fast Response Times typ. 100V/Sek.
• Adjustable Overcurrent Switching-off
• RS 232 / IEEE 488 Interface (Option)
• Measurements Vrms V, Crms A
• Switching-on and off via relay (Option)
  

The AC sources of the series EAQ-MT have been developed for the simulation and analysis of one- or three-phase line voltage particularly for high power. The output voltage is infinitely variable between 1 and 100% of the nominal voltage and is being kept constant with a deviation of < 1%. The preset reference input can be reached with the potentiometer as well as via the optional interfaces. In 3-phase units the regulation is controlled by phase L1. The structure of the AC source EAQ-MT consists of a regulated ring transformer with isolation. The regulated ring transformer is operated through a DC motor. The set voltage is being kept constant at deviations of the line input voltage as well as at load variations at the output.

Brochure ET-Testsystem EAQ-MT

Line simulator EAQ-TIP

For the complete line simulation of all technical networks from DC - 2000 Hz

• V- und C-constant !
• AC Voltage 0..300 Vrms (500V)
• DC Voltage 0..425 Vdc (700V)
• Frequency DC, 1 - 500 Hz (2000 Hz)
• Phase Triggered ON- and OFF-Switching
• External Oscillator Inputo RS 232- Interface , IEEE 488 (Option)
• Measurements Vrms V, Crms A, Cpeak A, Power W, Power VA, Freq. Hz, Cos Phi
  

The comfortable handling of the line simulator EAQ is possible with the new Tipturn E control system. A clearly arranged LCD display offers a view of all necessary parameters, such as measured values, limit values, etc.. With only one button all functions are adjustable via an easy menu selection. Standard is the integrated Centronics Interface on which a printer can be connected without any special software. All measured values can be transferred to another computer via RS232. The functions of the simulators can be manual or in a stored automatic-test procedure. An automatic self-test after switching on belongs to the standard achievement as well as a user defined setting.

Brochure ET-Testsystem EAQ-TIP

Kikusui

PCR-L/ series Multi-Purpose AC Power Supply

• Liner-amp type
• AC:1 to 150/2 to 300V, 1 to 999.9Hz
  

DC:1.4 to 212/2.8 to 424V

• 1Ø, 500VA: PCR500L
• 1Ø, 1000VA: PCR1000L
• 1Ø, 2000VA: PCR2000L
• 1Ø, 4000VA: PCR4000L
• 1Ø, 6000VA: PCR6000L
• 1Ø, 8000VA: PCR8000L
• 1Ø, 12000VA: PCR12000L
• 1Ø, 18000VA: PCR18000L

Brochure Kikusui PCR-L

PCR-W/W2 series High efficiency AC Power Supply

• PWM inverter type
• AC:1 to 150/2 to 300V, 1 to 500.0Hz
• DC:1.4 to 212/2.8 to 424V
• 1Ø, 2KVA: PCR2000W
• 1Ø, 4KVA: PCR4000W
• 1Ø, 8KVA: PCR8000W
• 1Ø, 12KVA: PCR12000W
• 1Ø or 3Ø selectable, 6KVA: PCR6000W2
• 1Ø or 3Ø selectable, 12KVA: PCR12000W2