2080 Electrical Check Box

The 2080 is housed in a robust plastic case with integral handle - ideal for on or off site use.

The complete solution to the calibration of electrical test instrumentation

The increasing demand for the calibration of electricians tools brought on by government regulations and quality systems has presented a problem for calibration laboratories. Although these types of electrical equipment are relatively low in accuracy, they are difficult to calibrate due to the varied test equipment required, skill level and safety aspects associated when using live mains on an unprotected line. this precluded cost effective calibration....UNTIL NOW

The 3200 from Transmille is specifically designed to reduce the calibration and test time of electrical test equipment by bringing together in one portable box all the functions needed. The internal microprocessor controls tests, operation & measurements. Test instructions, readings and settings are displayed on a large backlit graphic LCD display which makes operation simple.

PC control for automating calibration, producing certificates and reports

The 3200 Bi directional RS232 serial interface allows direct connection to either a desk or portable PC comm. port. ProCal Lite & ProCal Calibration Software is also available to simplify and reduce the time to produce calibration certificates. An evaluation CD is available containing full versions of all Transmille software.

 

 Performs calibration checks on:

Digital & Analogue Insulation Testers

Tests low resistance continuity ranges & measures current, tests high resistance to 2GW, measures test voltage and current and generates AC Voltages to 400 Volts.

PAT Testers
Earth Bond resistance measurements, measures Bond Test Current, Leakage/Insulation and Load Tests.

RCD Testers
Tests Trip time and Measures trip Current and trip current duration.
 •  Trip current waveform is digitised for accurate analysis.
 •  Immediate mode allows timing to be started immediately on detection of current reaching trip level.
 •  Zero Crossing mode allows timing to be started from the preceeding zero crossing of the mains cycle in which current reached 70% of the trip level.
• Automatic measurement technique selection

For enhanced accuracy the 3200 automatically selects either True RMS measurement for time periods above 200ms or RMS Peak corrected measurement for trip times less than 200ms. Using these techniques, the 3200 Electrical Test Equipment Calibrator can accurately and reliably calibrate RCD testers from a wide range of manufacturers.

LOOP Testers
Simulates 11 set values from 0.05W to 1 kW. 
Also supports 2 optional external values.
Auto loop correction for supplied loop impedance (option).
 

Brochure Transmille 3200-series

Extended Specifications 3200